If you want the ultimate in power solutions then our XPower Package is for you! It includes:

• XPower - Mini Rechargeable Battery plus

• DVR 5v Power Adapter and

• Power Cable Splitter.

These components will allow you to power both your camera and the DVR from the mini XPower Battery. This means you no longer need to spend money on regular cell batteries to power your camera and also allows you to use the DVR for longer, charging it during use!

Please remember to select your DVR model from the drop down menu.

If you are looking for an easy to use power supply then our rechargeable XPower pack is for you! It will supply 12v to your cameras and do away with the need to keep replacing your batteries saving £££'s in the long run.

It's light too, the regular battery box supplied with the cameras weighs 220g when loaded with batteries. The XPower weighs less than half that, coming in at just 100g!

On a full charge the XPower Pack will run one of our cameras for a good 8 hours, two cameras for 4 hours etc. It's easy to use and comes supplied with a charger.

If you use your camera in a fixed position on your bike or car then it may be easier (and more economical!) to connect the camera directly to the vehicle and pickup the 12v supply.

The 12v supply on your vehicle is relatively easy access and there are a number of places to tap into this such as the feed to cigarette lighter socket or lighting circuitry for example.

Our 1.8m cable has a DC plug on one end which fits all our cameras and 2 polarity marked bare wires on the other which you can connect up to your vehicle.

If you're wanting to use your DVR for a prolonged period you may wish to wire it directly into your bike or car. Our DVR Power Adapter will allow you to do just this as it converts the 12v feed from your vehicle to a safe 5v, the voltage needed to power the DVR.

The socket on DVR Power Cable connects to the 12v Pickup cable (above) which should be wired into your vehicle electronics. If you don't already have the 12v Pickup cable you'll need this too.

The other end of the DVR Power Cable has a plug on which will connect straight to your DVR. When ordering remember to select your own DVR model from the list!

The Power Cable Splitter is a really useful bit of kit, it allows you to take a single power feed and distribute it amongst more than one device, for example you can take one feed, split it then power both a camera and the recorder.

This can be used with any of our power supply options including battery packs and direct feeds from your vehicle.

The Splitter cable is available in 2 forms:

• '1 to 2' (power 2 devices)

• '1 to 4' (power up to 4 devices)

Remember you can always add the splitter cables together too, 2 x '1 to 2' splitter cables would effectively give 3 spare outputs for example.

A much requested item. The new LED Power Switch can be connected into your power wiring giving you total control.

Often if taking a feed from your bike or vehicle you'll need to disconnect the connectors at some point to avoid the camera equipment draining your battery when not in use. Alternatively if its an everyday vehicle chances are you don't want your cameras running all the time.

The LED Power switch is a simple but effective solution that solves those problems with a simple ON/OFF switch and gives you the green light when your equipment is ON!

Our Booster pack consists of a an extension lead for both the video and power connections from the camera. It is available in 3 lengths:

Using the 4K Booster extends your cabling allowing you to mount the camera in hard to reach areas while having your battery pack and recording device in a more convenient place.

Power your bullet camera, DVR or Quattro switcher unit from any 240v power socket.

Ideal solution if you are setting up your equipment or wish to use it in a fixed location. Saves on batteries too!

If you are using your camera for track days or any other vehicle use then take the easy option. Power your camera using our special Camera Cigar Power Supply

It simply connects to the power input on your camera with the other end plugging into the cigar lighter socket in your car.

If you need to recharge your DVR on location or wish to power it while on the move then our DVR Cigar Power Supply is what you need.

It simply connects to the DC input on the recorder with the other end plugging into the cigar lighter socket in your car. When ordering remember to select your model of DVR from the drop down list to ensure you receive the correct fitting.

If you are tapping into an unregulated 12v feed on a vehicle or connecting directly to its battery you may require a voltage regulator.

Our 12v Power Regulator will protect your bullet camera or other equipment from power surges by ensuring that no more than 12v passes through it. A separate regulator is required for each device.

Replacement lithium battery for use with your DVR. Ideal if you need to continue using your recorder when the power has run down and you haven't got time to recharge it.

Simply eject the battery in the DVR and replace with a fully charged spare one. Please remember choose your model of DVR when ordering.

NB DV2 and DV3 models have built-in batteries and are not compatible.

Replacement 12v battery pack as supplied with bullet cameras.

Battery pack includes lead with camera plug fitting and PP3 clip for battery box connection. The battery box is available in 2 sizes AA and AAA.

(batteries not included)